Macrosystem Bogart SE Ver.2 User manual Manuale Utente Scaricare il pdf (Pagina 85)

100

Bogart SE 2 user manual

• Info

press the info button to activate a screen in the top right cor-

ner containing information.

It shows the position of the currently marked stamp (X and Y

coordinates), colour saturation and contrast of the background

picture, the status of the position matrix and step length.

• Return

Press the return button to go back to the menu `Burn ﬁlm to

CD/DVD). Once you have inserted a DVD and edited a menu,

start the burning process by pressing `3´ (burn CD/DVD). If

the expected capacity exceeds the disc capacity, you will

be informed accordingly. After this, the conversion process

begins. You can then monitor the progress by watching the

progress bar at the bottom of the screen. It shows the various

conversion steps. When all is done, the system begins burning

the disc. If you insert a recorded DVD RW, it will be deleted

(you will be asked). The system places automatic chapter

marks if you did not specify any yourself (see chapter 2.2.10.).

These automatic chapters are placed every 5 minutes. Please

wait until the system tells you that the burning process was

successful before you remove the disc. If you want to burn

another disc with the same contents, simply insert a new disc

and press button `3´ again. You can also copy a CD/DVD from

the DVD menu. Please note that in order to make a private

copy of a disc, you may require the permission of the copy-

right holder. Insert the disc you wish to duplicate and press

`4´ (Copy CD/DVD). The medium is loaded and the tray opens.

Insert an empty disc (a recorded DVD RW will be deleted) and

the system will burn the contents to the new disc. When the

process is completed, the tray will open again and you can

remove the disc. If you want to burn another disc, you have to

load the original disc again ﬁrst.

2.2.8 Navigating imported ﬁlms

Press the navigation button in the ﬁlm archive. This allows

you to jump/skip to speciﬁc ﬁlms. Use the direction buttons to

jump to the ﬁrst and last ﬁlm in the list. Use the Play button to

navigate to the last played ﬁlm. The Options button navigates

to the last edited entry.

2.2.9 Renaming imported ﬁlms

In order to rename imported ﬁlms and text required for the

ﬁlter settings, mark the desired ﬁlm in the archive and press

the `Text aA´ button. This menu holds multiple ﬁlter areas.

To change the text in a speciﬁc ﬁeld, press the respective

number. You can now use the trackball or keyboard/remote to

delete (record button) the text and enter a new text. You can

also change the genre and other parameters in this fashion.

• Increase contrast

Press the FF button to increase the contrast on the back-

ground image. Press it multiple times to further increase the

contrast.

• Select stamp

Use the four direction buttons to choose one of the refe-

rence images for the ﬁlms. If you have only added one ﬁlm, it

will already be selected. A selected ﬁlm has a yellow border

around it. Press the OK button to activate the ﬁlm and use the

direction buttons to move the image. Every time you press a

direction button, the image will move in that direction.

• Change steps

Use the P+ and P- buttons to change the length of each

movement step. When you move the images using the di-

rection buttons, this occurs in `steps´. You can increase the

step length by pressing P+. The step length `2´ requires ﬁve

times as many presses as `10´ to reach the same position. It is

recommended to increase the step length if you want to move

the image further away.

• Activate stamp

By pressing the OK button, the currently selected ﬁlm will be

activated, changing the border to bright blue. Once you have

positioned the image, press the OK button again to stick down

the stamp at that position.

• Change stamp/background image

Press the red heart button to change the background picture.

If you have one of the stamps activated (blue border), you can

use this button to instead change the image of the stamp. In

both cases, pressing the button brings up a screen showing

the current image. On the right, you can see the length of the

ﬁlm and the position of its reference image. Now you can use

the given direction buttons to move along the ﬁlm. Press the

Chapter+ and Chapter- buttons to jump to the start and end of

the ﬁlm and the FF and RW buttons to move along in 12-frame

steps (1 GOP) in both directions. You can also use the four

direction buttons to navigate. The speed is set using the P+

and P- buttons. The left and right buttons will move in frame,

second or minute steps while the up/down buttons provide

10-frames, 10-seconds or 10-minutes steps. Once you have

found a suitable image, conﬁrm with OK. Pressing Return can-

cels without any changes made.

• Yellow star

This activates or deactivates the matrix for auto-positioning.

Press the yellow star once to switch it on and off. The matrix

positions the images/stamps along an invisible line and helps

you to position stamps in a tidy row.

• Restore stamp position

Press this to reset the position of the stamp and return it to its

original place.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 99 100

Commenti su questo manuale

Nessun commento

Macrosystem Bogart SE Ver.2 User manual Manuale Utente Pagina 85

Commenti su questo manuale

Prodotti e manuali riguardandi Software Macrosystem Bogart SE Ver.2 User manual